ECO+
MACHINE ROOMLESS ELECTRIC LIFT – LATERAL CHASSIS WITH INVERTED GUIDE RAILS.
Machine roomless electric lift that reaches a 200 mm pit up to 450kg specially designed for renovations of existing buildings. Thanks to this configuration, we are able to optimize the shaft in the same way as hydraulic lifts with the advantages of electric lifts with gearless machines.
| Useful load |
| Speed |
| Power |
| Maximum travel |
| Pit |
| Headroom |
| Up to 750 kgs |
| Up to 1,60 m/s |
| From 2,2 to 7,3 cv |
| 50 mts |
| Standard 1.100 mm / Up to 200 mm (with compensatory measures) |
| Standard 3.600 mm / Up to 3.200 (with compensatory measures) |
Gearless machine. permanent magnet synchronous motor. Special traction cables
of 6.5 mm diameter.
The car present inverted guides rails and a backpack type chassis, counterweight inside the car guide rails.
The distance between wall and cabin is 300 mm in cars up to 600 kg.
Minimum energy consumption and maximum performance.
Possibility of supply with 220 Vac single-phase voltage for lifts up to 450 kg with a
speed of 1 m / s (2200 w) and up to 0.50 m / s for 630 kg.
In addition, with the energy recovery system and batteries, which we can optionally supply, we can reach 750 kg with 220 Vac single-phase voltage.
Very low noise level.
Vibration level less than 0.75 mm/s.
Complete automatic rescue system using UPS. In the event of a power failure, the car will move to the nearest level and open the doors.
TECHNICAL SPECIFICATIONS
DRAWINGS
OTHER CONFIGURATIONS
SHORTCUTS